A small self assembly board to allow rapid prototyping of PICAXE-08 circuits. Includes all components including download socket, socket for the PICAXE-08M, resistors for download and battery clip. Purchase PICAXE-08M separately. You may also require a battery holder and either an AXE-026 serial or AXE-027 USB download cable. $4.49.
Kit contains the circuit board, three LEDS, a 4-pole dip switch, light dependent resistor (photoresistor), 8-pin socket and 08M microcontroller, piezo speaker, stereo connector, battery holder and clip. The kit does not contain the AXE-026 or AXE-027 Serial Cable or the CD. You may download software and manuals from www.picaxe.com. .
Kit contains the circuit board, resistors R1 - R6, LED, piezo speaker, 1N4004 diode, BC548B NPN transistor, electrolytic capacitor, PICAXE-08M, 8-pin socket, 3.5 mm download socket, battery clip, battery holder, three 2-position screw type termina blocks and light dependent resistor (photoresistor). Note that the instructions indicate a bi-color LED. This is an error. The capacitor I provide is 10 uFd (not 100).
The kit does not contain the AXE-026 or AXE-027 Serial Cable or the CD. You may download software and manuals from www.picaxe.com.
This kit is nice in impressing your spouse, children or parents as you can quicky flash an LED and play tunes!
Kit includes the circuit board, resistors R1 - R10, seven 5 mm red LEDs, pushbutton, 8-pin socket and PICAXE-08M controller, stereo connector, battery holder and clip.
The kit does not contain the AXE-026 or AXE-027 Serial Cable or the Editor CD. You may download software and manuals from www.picaxe.com. .
