Address    Value   Field                Category                                                Setting                                  

    8007      09E4  FOSC    Oscillator                           INTOSC Oscillator, I/O function on RA7/OSC1/CLKI                           
                    WDTE    Watchdog Timer Enable bit            WDT disabled                                                               
                    PWRTE   Power-up Timer Enable bit            PWRT disabled                                                              
                    MCLRE   MCLR Pin Function Select             RA5/MCLR/VPP pin function is MCLR                                          
                    CP      Flash Program Memory Code Protection bitProgram memory code protection is disabled                                 
                    CPD     Data EE Read Protect                 Data memory code protection is disabled                                    
                    BOREN   Brown-out Reset Enable bits          Brown-out Reset disabled                                                   
                    CLKOUTENClock Out Enable bit                 CLKOUT function is disabled. I/O or oscillator function on RA6/CLKOUT      
                    IESO    Internal-External Switch Over        Internal/External Switchover mode is disabled                              
                    FCMEN   Fail Clock Monitor Enable            Fail-Safe Clock Monitor is disabled                                        
    8008      C003  WRT     Flash memory self-write protection bitsWrite protection off                                                       
                    PLLEN   PLL Enable bit                       4x PLL disabled                                                            
                    STVREN  Stack Overflow/Underflow Reset Enable bitStack Overflow or underflow will not cause a Reset                         
                    BORV    Brown-out Reset Voltage selection    Brown-out Reset Voltage (VBOR) set to 2.5 V                                
                    LVP     Low Voltage Programming Enable bit   High voltage on MCLR/VPP must be used for programming